Have you had a difficult time trying to connect to your Netgear Orbi satellite with the router? Don’t worry! You’re not the only one struggling with this problem. Some users aren’t aware of the procedure for syncing Orbi satellites with routers. However, the good news is that our experts are able to assist you in overcoming the problem. Keep reading
Causes of Orbi Satellite Not Syncing With Router
There are a variety of reasons that may be preventing the Orbi network and satellite from connecting. Here are a few of the most common reasons below:
- You’ve not pressed the Sync button on any of your Orbi devices. Orbi devices.
- There is a distance of about ten kilometres between the Orbi router and satellite, which is far too long.
- The firmware on the Netgear Orbi is not up-to-date.
- A sync option on one of your devices has been broken.
If you now know the reason you’re experiencing this Netgear Orbi satellite not connecting to your router, let’s look at the steps needed to fix it.
Netgear Orbi Satellite Isn’t Connecting to Router?
Hold the Sync button.
The reason that most users are unable to sync their Orbi devices is because they aren’t sure how to sync their Orbi satellites. There’s a chance that you’ve forgotten to press the Sync button. To confirm, make sure the Sync button on your Orbi router and the satellite are both pressed.If it’s not, make the correction immediately!
Reduce the distance between the Orbi devices.
If the distances between your devices are too great, you may experience problems with the Orbi satellite not syncing with the router. To fix the issue, you must make sure your Orbi satellite and router are located close to each other. However, don’t get too close! If they do, their WiFi signals could be in conflict at any moment, causing you to confront technical problems. After making changes, verify whether you are successful in synchronising the Orbi satellite with your router.
Make sure to update the firmware of your Orbi.
One of the most common reasons your Orbi satellite isn’t synchronising with your WiFi router is that the firmware is out of date.So, ensure that your Orbi device’s firmware is updated to its most current version. Do you know how to do it? Just follow the instructions listed below to refresh your WiFi devices:
Start an internet-based browser on your personal computer.
Visit the Orbi router’s Netgear login page by using the default URL.
Enter an account with the username, password, or default, then click Log In.
Click on the Settings menu and look for an option to update the firmware. Click the “Firmware Update” button.
After you have found it, select the Firmware Update option and give your Orbi device a bit of time to be updated.
After installing the Netgear firmware updates, check to see if the problem with the Orbi satellite not synchronising with the router has been resolved. If not, don’t put down the book.
A pro-tip is that you may make use of the Orbi application for updating the firmware on your Netgear Orbi device.
Execute a factory reset.
Didn’t the Orbi satellite sync with your router work? Unfortunately, you have no other choice but to reset the settings on your Netgear Orbi gadget to resolve the problem.
Here are the steps you should follow in order to restore your Orbi to default settings from the factory:
- Make sure the Netgear Orbi is on.
- Then, locate the reset button, which is located on the WiFi device.
- When you’ve found it, press it with a paper clip.
- Hold the button on the reset for a few seconds, then let it go.
When you’re done making the factory default reset, you should check whether the problem with the Orbi satellite not synchronising with the router has been resolved.