Friday, June 2, 2023
HomeTechnologyTactics to Fix Netgear Extender Firmware Update Failed Issue

Tactics to Fix Netgear Extender Firmware Update Failed Issue


Related stories

Topmost Tips to Fix Rockspace Extender Keeps Rebooting Issue

The Rockspace extender retains rebooting concern has ruined the...

Shadowrocket Proxy Official Review For All

The Shadowrocket Proxy is a software program utility that...

How to Choose Right Technology Stack for Your Mobile App

Expertise has been evolving consistently, and so does cell...

Essentials Hoodie with a Hook

Introduction Style and performance are the 2 key parts that...

The Health Benefits of Seeing a Pulmonologist in Lahore.

Are you experiencing respiration issues or have a persistent...

Do you want your Netgear WiFi range extender to work effortlessly 24×7? Do you actually want to prevent buffering in videos? If you nod in yes, then it is possible if you update Netgear extender’s firmware via or IP.

What happened? Tried to update the Netgear extender’s firmware but failed to do so? Well, that’s not good! But, you don’t have to worry at all because you are on the correct post. Here, we have mentioned some topmost tested and proven hacks following which troubleshooting “Netgear extender firmware update failed” issue will be fun as enjoying Sunday with children for you. Keep reading!

Let’s dig a little deeper!

Fixed: Extender Firmware Update Failed

Here are the topmost solutions for “Netgear extender firmware update failed” issue.

Download the Firmware’s Correct Version

The first and foremost reason why you experienced the issue is because you downloaded the incorrect firmware version. Yes, that’s absolutely correct! To do away the problem, we highly suggest you download the firmware version compatible with your Netgear extender’s model you have.

After downloading the correct firmware version on your Netgear WiFi range extender, see if you are still experiencing “Netgear extender firmware update failed” issue. If yes, then without delay, walk through the next troubleshooting hack highlighted below.

Follow the Exact Firmware Update Instructions

Another reason why you are experiencing the “Netgear extender firmware update failed” issue is because of the following:

  • You followed the wrong instructions
  • Skipped a step

Look, whatever the case is, it is suggested that you try to update the firmware of your Netgear extender again, and this time do it properly keeping the aforementioned points into consideration.

Additionally, it is also advised to have access to the correct SSID (WiFi network name) i.e. Netgear_ext In the event that you are not connected to correct network or running on a poor internet speed, you will surely bump into the issue.

Check the Internet Connection

Have you considered that a weak or poor internet connection can also lead you to “Netgear extender firmware update failed” issue? No? That’s strange! Know that slow internet can cause issue you are currently facing. For fixing this, you need to contact your internet service provider and check if everything is fine from his end. If you find anything wrong from the end of your ISP, ask him to get it fixed right away.

Verify the Ethernet Connection

Improper or unstable Ethernet connection between your Netgear range extender and router also leads to the issue. Therefore, check the Ethernet cable connecting your device, Apart from this, ensure that:

  • The cable is well-maintained
  • And, it (cable) is connected to the correct ports of the Netgear extender and router

After applying this fix, check if you can do extender’s firmware update page via or

Power Cycle Your Netgear Extender

OMG! None of the troubleshooting fixes listed above bring you luck? If so, then in such a case, power cycling is suggested. The reason being, technical glitches can hamper the performance of your Netgear extender and also prevent latest firmware to download on it. Thus, for fixing the issue and to make the most out of your Netgear extender, follow the instructions highlighted below and know how to power cycle or restart your device:

  • First things first, disconnect your router and the Netgear extender.
  • Then, unplug your Netgear extender and wait for some time.
  • Now, plug back the Netgear extender, connect it to router, and have access to the extender’s SSID again.

See, if power cycling has helped you out to fix “Netgear extender firmware update failed” issue or not.

Use the Correct Extender Login Details

In order to access the extender’s firmware update page, you need to log in to the device via correct admin details. But, what if you don’t have them or have lost or forgotten them? In such a case, you need to reset your Netgear extender back to factory default values. After resetting, you have to perform Netgear extender setup from scratch. Once you are done, try to perform the Netgear extender’s firmware update again. This time, we really hope that you get success.

We hope that with the help of the abovementioned tested and proven hacks, you are able to troubleshoot “Netgear extender firmware update failed” issue.


- Never miss a story with notifications

- Gain full access to our premium content

- Browse free from up to 5 devices at once

Latest stories

%d bloggers like this: